HPAS 高壓單座角型閥閥芯采用上導結構，閥體結構緊湊，流體通道呈S型，壓降損失小，流量大，可調范圍廣。閥芯部分導向面積大，抗振性能強。
調節閥泄漏量符合ANSI B16.104標準。調節閥配用多彈簧薄膜或氣缸執行機構，其結構緊湊，輸出力大。
產品符合GB/T4213-2008標準。
High Pressure Single Seated AngleValve
HPAS High pressure Single seated Angle Valve has a top-guided valve plug, a compact valve body and an S-shape flow passage that features low pressure loss, allows a large flow capacity, rangeability and high accuracy flow characteristics, complies with the IEC534-2-1976 standards. The valve plug is highly vibration-resistant as it is held by a top guide section which has a large sliding area.
The leakage complies with the ANSI B16.104 standards. The actuator integrated with simplest mechanisms utilizes a compact yet powerful diaphragm actuator loaded with multiple springs or a cylinder.
This product complies with the GB/T4213-2008 standards.
|
閥體形式 Type |
角型單座鑄造球型閥 Angle, single seated, cast globe valve |
|---|---|
|
公稱通徑 Nominal size |
DN25～80mm |
|
額定CV值 Rated CV value |
0.25～110 |
|
公稱壓力 Pressure rating |
ANSI900～2500，JIS63K |
|
流體溫度 Fluid Temperature |
-196～+350℃ |
|
連接方式 End connections |
法蘭型 Flanged：RF、RJ 焊接型 Welded end：SW、BW |
|
閥體材質 Body Materials |
SCPH2/WCB，SCPH21/WC6，SCS13A/CF8，SCS14A/CF8M SCS16A/CF3M，Ti |
|
閥內件材質 Trim Materials |
SUS304，SUS316，SUS316L，SUS410，SUS630 |
|
可調比 Rangeability |
50：1 |
|
流體特性 Flow characteristics |
線型 Linear，等百分比 EQ% |
|
閥座泄漏量Leakage |
ANSI Class IV |
|
執行機構 Actuator |
氣動薄膜式 HA，氣缸活塞式 VA、VP，電子式 EIL 智能式 M8系列 |
HPAS 高壓單座角型閥